Skip to content
+44 (0)1204 863290 [email protected]

Snapsil TN3005 Silicone Adhesive Sealant

SnapSil* TN3005 One-component, low volatile siloxane, silicone adhesive sealant

SnapSil TN3005 is a one-component, low volatile siloxane, silicone adhesive sealant that cures at room temperature upon exposure to atmospheric moisture, and exhibits primerless adhesion to many substrates.

Key Features & Benefits of SnapSil TN3005

  • Fast tack-free time
  • Low volatility
  • Non-corrosive to most metals
  • Primerless adhesion to many substrates
  • Low odor cure: releases an alcohol vapor during cure
Snapsil TN3005, Snapsil TN3005 Silicone Adhesive Sealant

Snapsil TN3005 Available Online

Potential Applications of SnapSil TN3005

  • Insulating adhesive seal and fixing for electronic and electrical parts.
  • Waterproof sealant for electronic, electrical and communication equipment
  • General adhesive for metals, plastics, glass, etc.

Typical SnapSil TN3005 Cured Physical Properties

  • Cured Properties (3 days @ 23°C, 50% RH)
  • Appearance – Elastic rubber, clear, white, black
  • Density (23°C) g/cm3 – 1.04
  • Hardness (Type A) – 22
  • Tensile Strength MPa – 1.8
  • Elongation % – 330
  • Adhesion Strength MPa – 1.2
  • Volatile Siloxane(1) (D3-D10) wt% – 0.01
  • Volume Resistivity ohm•cm – 2.0×1015
  • Dielectric Strength – 26
  • Dielectric Constant (60Hz)-  2.7
  • Dissipation Factor (60Hz) – 0.002

SnapSil TN3005 Product Safety, Handling and Storage

Customers should review the latest Safety Data Sheet (SDS) and label for product safety information, safe handling instructions, personal protective equipment if necessary, emergency service contact information, and any special storage conditions required for safety. Momentive Performance Materials (MPM) maintains an around-the-clock emergency service for its products. SDS are available at or, upon request, from Silicone Solutions.

For product storage and handling procedures to maintain the product quality within our stated specifications, please review Certificates of Analysis, which are available in the Order Center. Use of other materials in conjunction with MPM products (for example, primers) may require additional precautions. Please review and follow the safety information provided by the manufacturer of such other materials.

For more information on our range of silicone adhesives click here

To see videos of our products in use please click here 

Back To Top