Skip to content
+44 (0)1204 863290 [email protected]

Momentive RTV112 FDA Adhesive Sealant Self Leveling

Click Here To Download Detailed RTV112 Technical Data Sheet

Momentive RTV112 Description

RTV112, is a self leveling consistency, ready-to-use adhesive sealant which is extremely versatile. It cures to a tough, durable, resilient silicone rubber on exposure to atmospheric moisture at room temperature.

Note: Acetic acid vapours are released from the sealant surface as a by-product of cure.

RTV112, sealant is a standard strength self leveling consistency product that can be applied to vertical and overhead surfaces where pourable or self-leveling sealants do not provide a practical alternative.

If self levelling sealants are required (which are preferable to paste-consistency sealants when flow into small crevices and hard-to-reach places is desired.) then RTV112 and RTV118 sealants are self-levelling products

For high temperature applications

Where standard strength high-temperature sealants are required RTV106 sealant is a paste-consistency sealant, whilst RTV116 sealant is a self-levelling sealant.

Maximum Thickness 6mm (1/4in.)

Since all the above sealants (RTV102, RTV112, RTV118, RTV106 and RTV 116) utilise a moisture cure system, they must not be used in thicknesses of greater than 6mm (1/4 in.).

If your application requires a section depth that will exceed 6mm (1/4 in.), then Momentive Performance Materials one component, addition cure or two-component silicone rubber compounds are recommended.

Momentive RTV112 FDA Available Online

Key Features and Benefits of RTV112

  • One-component self leveling product
  • Capability to cure at room temperature and ambient humidity
  • Self adhesion properties
  • Low temperature flexibility
  • Not suitable for high temperature applications
  • Excellent weatherability and ozone and chemical resistance
  • Excellent electrical insulation properties

RTV112 Typical Physical Properties

  • Consistency : Self Leveling
  • Colour : White
  • Viscosity, poises : 200
  • Specific Gravity : 1.05
  • Tack free time : 20 minutes

RTV112 Mechanical Cured Properties

  • Tensile Strength, kg/cm2 (lb/in2 ) : 23 (325)
  • Elongation % : 325
  • Hardness Shore A : 25
  • Shear Strength, kg/cm2 (lb/in2)(2) : 7 (100)
  • Peel Strength, kg/cm (lb/in)(3) : 3 (15)

RTV112 Electrical Cured Properties

  • Dielectric Strength, kv/mm (v/mil) : 16 (400)
  • Dielectric Constant @ 60 Hz : 2.8
  • Dissipation Factor @ 60 Hz : 0.001
  • Volume Resistivity, ohm-cm : 6×1014

RTV 112 Important Information

(1) Cure time 3 days at 25°C (77°F) / 50% relative humidity.
(2) At 100% cohesive failure.
(3) At 100% cohesive failure using 1 in. x 8 in. stainless steel screen at 180° pull angle.
(4) Information is provided for customer convenience only. These properties are not tested on a routine basis.

  • RTV 112 sealant was not designed for and should not be used for applications intended for permanent implantation into the human body.
  • RTV 112 sealant is not for use in delicate electrical and electronic applications in which corrosion of copper, brass or other sensitive metals is undesirable

For more information on the complete range of Silicone adhesives, encapsulants and potting compounds available from Silicone Solutions click here 

Back To Top