Skip to content
+44 (0)1204 863290 [email protected]

Momentive RTV106 FDA Adhesive Sealant High Temperature Paste

Click Here To Download Detailed RTV106 Technical Data Sheet

Momentive RTV106 Description

RTV106, is a paste consistency high temperature, ready-to-use adhesive sealant which is extremely versatile. It cures to a tough, durable, resilient silicone rubber on exposure to atmospheric moisture at room temperature.

Note: Acetic acid vapours are released from the sealant surface as a by-product of cure.

RTV106, sealant is a standard strength paste consistency product that can be applied to vertical and overhead surfaces where pourable or self-leveling sealants do not provide a practical alternative.

If self levelling sealants are required (which are preferable to paste-consistency sealants when flow into small crevices and hard-to-reach places is desired.) then RTV112 and RTV118 sealants are self-levelling products

For high temperature applications

Where standard strength high-temperature sealants are required RTV106 sealant is a paste-consistency sealant, whilst RTV116 sealant is a self-levelling sealant.

Maximum Thickness 6mm (1/4in.)

Since all the above sealants (RTV102, RTV112, RTV118, RTV106 and RTV 116) utilise a moisture cure system, they must not be used in thicknesses of greater than 6mm (1/4 in.).

If your application requires a section depth that will exceed 6mm (1/4 in.), then Momentive Performance Materials one component, addition cure or two-component silicone rubber compounds are recommended.

Momentive RTV106 FDA Available Online

Key Features and Benefits of RTV106

  • One-component product
  • Capability to cure at room temperature and ambient humidity
  • Self adhesion properties
  • Low temperature flexibility
  • Suitable for high temperature applications
  • Excellent weatherability and ozone and chemical resistance
  • Excellent electrical insulation properties

RTV106 Typical Physical Properties

  • Consistency : Paste
  • Colour : Red
  • Application rate (g/min) : 400
  • Specific Gravity : 1.07
  • Tack free time : 20 minutes

RTV106 Mechanical Cured Properties

  • Tensile Strength, kg/cm2 (lb/in2 ) : 26 (400)
  • Elongation % : 400
  • Hardness Shore A : 30
  • Tear Strength, kg/cm (lb/in) : 7 (40)
  • Shear Strength, kg/cm2 (lb/in2)(2) : 14 (200)
  • Peel Strength, kg/cm (lb/in)(3) : 7 (40)

RTV106 Electrical Cured Properties

  • Dielectric Strength, kv/mm (v/mil) : 20 (500)
  • Dielectric Constant @ 60 Hz : 2.8
  • Dissipation Factor @ 60 Hz : 0.001
  • Volume Resistivity, ohm-cm : 3×1014

RTV 106 Important Information

(1) Cure time 3 days at 25°C (77°F) / 50% relative humidity.
(2) At 100% cohesive failure.
(3) At 100% cohesive failure using 1 in. x 8 in. stainless steel screen at 180° pull angle.
(4) Information is provided for customer convenience only. These properties are not tested on a routine basis.

  • RTV 106 sealant was not designed for and should not be used for applications intended for permanent implantation into the human body.
  • RTV 106 sealant is not for use in delicate electrical and electronic applications in which corrosion of copper, brass or other sensitive metals is undesirable

For more information on the complete range of Silicone adhesives, encapsulants and potting compounds available from Silicone Solutions click here 

For more information on RTV106 adhesive sealant click here

Back To Top