1 part adhesives and sealants

RTV102, RTV103, RTV106, RTV108, RTV109, RTV112, RTV116 and RTV118

General purpose silicones adhesives featuring;
⦁ FDA (food contact), UL (Underwriters Lab) and Mil Spec Approvals.
⦁ Range of pastes and flowable grades
⦁ Temperature resistant to 315C (intermittent).RTV106/116
⦁ Acetic acid cure systems give great bond to silicone rubber and other substrates

Learn More

RTV157 and RTV159

⦁ Aerospace industry class leading grades;
⦁ High strength x4 tear of GP products
⦁ RTV159 has temperature resistance to 315C (intermittent)
⦁ Acetic acid cure system

Learn More

IS5628E

⦁ High strength adhesive with new adhesion promotion technology
⦁ 1 part adhesive with x 4 tear strength of GP materials.
⦁ Translucent and semi flowable. Capable of neat, easy tooling.
⦁ FDA and BfR food contact approval
⦁ Fast skin over and cure at room temperature
⦁ Unrivalled adhesion to silicone

Learn More

RTV1473

⦁ Formed in place gasket grade, FIPG.
⦁ Fluid resistant dispensible paste
⦁ Acetic acid cure

Learn More

RTV160, RTV162, RTV167

⦁ Neutral cure one part silicone electronics grade sealants and adhesives
⦁ Paste (162), flowable (160), and very high strength, x4 Tear (167)
⦁ UL (Underwriters Lab) approved. Mil Spec (162/167)
⦁ Non corrosive on copper and its alloys

Learn More

RTV 133

⦁ Neutral cure one part electronics grade for use in hazardous areas
⦁ UL94V0 Underwriters Lab, Flame Retardent, Vertical Burn, Self Extinguishing paste
⦁ Non corrosive on copper and its alloys

Learn More

TSE392, TSE397 and TSE399

⦁ Electronic grades designed for electronic assemblies, to seal, bond and coat;
⦁ Range of consistencies from paste to liquid when dispensed
⦁ Fast tack free times c. 5 minutes
⦁ UL approvals, Underwriters Lab (392/397)
⦁ Good adhesion to differing substrates

Learn More

RTV142

⦁ Aerospace qualified neutral cure adhesive sealant
⦁ NASA/ESA listed for outgassing, volatility, and weight loss.
⦁ Can be used on composites, metals and electronics
⦁ Avoids fogging on optical surfaces

Learn More

RTV524x Series

⦁ Cost effective neutral cure pastes. Used in automotive lighting
⦁ Fast tack free, and build strength
⦁ UL Approved, (Underwriters Labs).
⦁ Outstanding hydrolytic resistance to exposure to water

Learn More

TSE322

⦁ One part, heat cure adhesive. No heat, no cure.>100C minimum.
⦁ Semi-flowable. Used in automotive electronic assemblies
⦁ Outstanding adhesion to many substrates:-Metals plastics etc
⦁ UL94HB flame retardent approved, Underwriters Labs.

Learn More

TSE326 TSE326m-ex

⦁ One part, heat cure adhesive. No heat, no cure.>100C minimum.
⦁ High temperature resistance to 315C, intermittent
⦁ Low/medium viscosity. Used in sensors and small appliances
⦁ Outstanding adhesion to many substrates:-Metals plastics etc
⦁ TSE326 UL94HB flame retardent approved, Underwriters Labs.

Learn More

Addisil 6100

⦁ One part, heat cure paste. Very thixotropic for high build. 130C cure
⦁ Good adhesion to most substrates and components
⦁ Used in appliances and automotive electronic.
⦁ Can be stored at room temperature

Learn More

FRV1106

⦁ Fuel resistant fluorosilicone adhesive sealant, one component. Moisture cure.
⦁ High temperature resistant to 260C
⦁ Aerospace/Aviation approvals.
⦁ Acetic acid cure. Can bond to fluorosilicone rubber.

Learn More

PSA529 PSA550

⦁ Solvented contact adhesives for laminating silicone to itself and other materials
⦁ Enables fast tack free, bonding. Enables thin bond lines.
⦁ PSA529 can be used with and without SRC18 catalyst.
⦁ PSA550 is precatalysed

Learn More


Need Help? Chat to someone in our team.


Leave a Reply